Published:
August 06 2008, 11:55 AM
|
no comments
by
Ken Williams
On August 1st, 2008, CA published a security notice to address multiple vulnerabilities in CA products that embed Ingres.
Title: CA Products That Embed Ingres Multiple Vulnerabilities
CA Advisory Date: 2008-08-01
Reported By: iDefense Labs
Impact: A remote attacker can execute arbitrary code, gain privileges, or cause a denial of service condition.
Summary: CA products that embed Ingres contain multiple vulnerabilities that can allow a remote attacker to execute arbitrary code, gain privileges, or cause a denial of service condition. These vulnerabilities exist in the products and on the platforms listed below. These vulnerabilities do not impact any Windows-based Ingres installation. The first vulnerability, CVE-2008-3356, allows an unauthenticated attacker to potentially set the user and/or group ownership of a verifydb log file to be Ingres allowing read/write permissions to both. The second vulnerability, CVE-2008-3357, allows an unauthenticated attacker to exploit a pointer overwrite vulnerability to execute arbitrary code within the context of the database server process. The third vulnerability, CVE-2008-3389, allows an unauthenticated attacker to obtain ingres user privileges. However, when combined with the unsecured directory privileges vulnerability (CVE–2008-3357), root privileges can be obtained.
Mitigating Factors: These vulnerabilities do not impact any Windows-based Ingres installation.
Severity: CA has given these vulnerabilities a High risk rating.
Affected Products:
Admin r8.1 SP2
Advantage Data Transformer r2.2
Allfusion Harvest Change Manager r7.1
CA ARCserve Backup for Unix r11.1, r11.5 GA/SP1/SP2/SP3
CA ARCserve Backup for Linux r11.1, r11.5 GA/SP1/SP2/SP3
CA Directory r8.1
CA Job Management Option R11.0
CA Single Sign-On r8.1
CleverPath Aion BPM r10.1, r10.2
EEM 8.1, 8.2, 8.2.1
eTrust Audit/SCC 8.0 sp2
Identity Manager r12
NSM 3.0 0305, 3.1 0403, r3.1 SP1 0703, r11
Unicenter Asset Management r11.1, r11.2
Unicenter Remote Control r11.2
Unicenter Service Catalog r2.2, r11.1
Unicenter Service Metric Analysis r11.1
Unicenter ServicePlus Service Desk 6.0, r11, r11.1, r11.2
Unicenter Software Delivery r11.1, r11.2
Unicenter Workload Control Center r11
Affected Platforms:
1. Ingres verifydb file create permission override (CVE-2008-3356)
This vulnerability impacts all platforms except Windows.
2. Ingres un-secure directory privileges with utility ingvalidpw (CVE - 2008-3357)
This vulnerability impacts only Linux and HP platforms.
3. Ingres verifydb, iimerge, csreport buffer overflow (CVE-2008-3389)
This vulnerability impacts only Linux and HP platforms.
Status and Recommendation:
The most prudent course of action for affected customers is to download and apply the corrective maintenance. However, updates are provided only for the following releases: 2.6 and r3
Important: Customers using products that embed an earlier version of Ingres r3 should upgrade Ingres to the release that is currently supported (3.0.3/103 on Linux and 3.0.3/211 on UNIX platforms) before applying the maintenance updates. Please contact your product's Technical Support team for more information.
For these products:
Admin r8.1 SP2
CA ARCserve Backup for Linux r11.5 SP2/SP3
CA Directory r8.1
CA Job Management Option R11.0
CA Single Sign-On r8.1
EEM 8.2
EEM 8.2.1
Identity Manager r12
NSM r11
Unicenter Asset Management r11.1
Unicenter Asset Management r11.2
Unicenter Remote Control r11.2
Unicenter Service Catalog r11.1
Unicenter Service Metric Analysis r11.1
Unicenter ServicePlus Service Desk r11
Unicenter ServicePlus Service Desk r11.1
Unicenter ServicePlus Service Desk r11.2
Unicenter Software Delivery r11.1
Unicenter Software Delivery r11.2
Unicenter Workload Control Center r11
Apply the update below that is listed for your platform (note that URLs may wrap):
AIX [3.0.3 (r64.us5/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12833-r64-us5.tar.z
HP-UX Itanium [3.0.3 (i64.hpu/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12831-i64-hpu.tar.z
HP-UX RISC [3.0.3 (hp2.us5/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12830-hp2-us5.tar.z
Linux AMD [3.0.3 (a64.lnx/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12835-a64-lnx.tar.z
Linux Intel 32bit [3.0.3 (int.lnx/103)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.103.12836-int-lnx.tar.z
Linux Itanium [3.0.3 (i64.lnx/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12838-i64-lnx.tar.z
Solaris SPARC [3.0.3 (su9.us5/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12834-su9-us5.tar.z
Solaris x64/x86 [3.0.3 (a64.sol/211)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/patch-3.0.3.211.12832-a64-sol.tar.z
Ingres r3 Vulnerability Updates Install Steps (August 1, 2008)
Unix/Linux:
1. Log on to your system using the installation owner account and make sure the environment is set up correctly:
1. II_SYSTEM must be set to the Ingres system files
2. PATH must include $II_SYSTEM/bin and $II_SYSTEM/utility directories.
2. Change directory to the root directory of the Ingres installation or use a previously created directory.
cd $II_SYSTEM/ingres
or
cd <patch_directory>
3. Copy the download maintenance update file in to the current directory and uncompress
4. Read in the update file with the following commands:
umask 022
tar xf [update_file]
This will create the directory:
$II_SYSTEM/ingres/patchXXXXX
or
<patch_directory>/patchXXXXX
Note: ‘XXXXX' in patchXXXXX refers to the update number
5. Stop all Ingres processes with the ‘ingstop' utility:
ingstop
6. Change directory to the patch directory:
cd patchXXXXX
7. Within the patch directory run the following command:
./utility/iiinstaller
Please check the $II_SYSTEM/ingres/files/patch.log file to make sure the patch was applied successfully. Also check the $II_SYSTEM/ingres/version.rel to make sure the patch is referenced.
Note: The patch can also be installed silently using the ‘-m' flag with iiinstaller:
./utility/iiinstaller -m
8. Once the patch install has been complete, re-link the iimerge binary with the following command:
iilink
9. Ingres can then be restarted with the ‘ingstart' utility:
ingstart
For these products:
Advantage Data Transformer r2.2
Allfusion Harvest Change Manager r7.1
ARCserve for Linux r11.5 GA/SP1
CleverPath Aion BPM r10.1
CleverPath Aion BPM r10.2
Apply the build below that is listed for your platform (note that URLs may wrap):
AIX
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/install-3.0.3.211.12833-r64-us5.tar
HP-UX Itanium
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/install-3.0.3.211.12831-i64-hpu.tar
HP-UX RISC
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/install-3.0.3.211.12830-hp2-us5.tar
Linux AMD EI build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-211-EI-linux-x86_64.tar.gz
Linux AMD II build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-211-linux-x86_64.tgz
Linux Intel EI build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-103-EI-linux-i386.tgz
Linux Intel II build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-103-pc-linux-i386.tgz
Linux Itanium EI build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-211-EI-linux-ia64.tar.gz
Linux Itanium II build
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/ingres-3.0.3-211-linux-ia64.tgz
Solaris SPARC
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/install-3.0.3.211.12834-su9-us5.tar
Solaris x64/x86
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/r3/install-3.0.3.211.12832-a64-sol.tar
Ingres r3 Build Install Steps (August 1, 2008)
Important: Prior to installing the build, a full operating system backup of the $II_SYSTEM/ingres directory on Unix/Linux and %II_SYSTEM%\ingres directory on Windows must be taken with Ingres completely shut down. Also, a backup of any other DATA locations that you may have must be taken, again with Ingres shut down. In case there is a problem with the update install, this allows Ingres to be restored from the backup.
Unix:
1. Log in to the system as the installation owner and make sure the environment is set up correctly:
1. II_SYSTEM must be set to the Ingres home directory
2. PATH must include $II_SYSTEM/ingres/bin and $II_SYSTEM/ingres/utility directories
3. Add $II_SYSTEM/ingres/lib to the shared library path
4. Set TERM to ‘vt100' and TERM_INGRES to ‘vt100fx'
2. Copy the downloaded update file to the /tmp directory and uncompress
3. Read in the update file with the following commands:
umask 022
tar xf [update_file]
This creates a directory containing the distribution and other files.
4. Stop all applications that may be connected to or using any of the files in the Ingres instance.
5. Stop all Ingres processes with the ‘ingstop' utility:
ingstop
6. Important: Take an operating system backup of the $II_SYSTEM/ingres directory and other DATA locations that you may have elsewhere. Also, copy the $II_SYSTEM/ingres/files/config.dat and $II_SYSTEM/ingres/files/symbol.tbl files to a safe location to ensure that the configuration can be restored.
7. From the root directory of the Ingres installation ($II_SYSTEM/ingres), run the following command:
tar xf /tmp/<update_directory>/ingres.tar install
8. Run the following command:
install/ingbuild
9. The initial install screen appears.
10. In the Distribution medium enter the full path to the ‘ingres.tar' file (including the file) (See step 4).
11. Choose PackageInstall from the list of installation options and then choose ‘Stand alone DBMS Server' from the list of packages. Then choose ExpressInstall.
12. Choose Yes in the pop-up screen and press Enter key.
The install utility verifies that each component was transferred properly from the distribution medium. When this is finished (without errors), another pop-up screen for setting up the components comes up.
13. Select Yes and press Enter key to go to the Setup program.
14. Once the installation is complete, check the $II_SYSTEM/ingres/files/install.log for any errors. Also, check the $II_SYSTEM/ingres/version.rel file to verify the new build is referenced; this should show 3.0.3 for the build.
15. If there are no errors, then restore the $II_SYSTEM/ingres/files/config.dat and $II_SYSTEM/ingres/files/symbol.tbl files from the copies made in step 6 to replace the existing files.
16. Start Ingres using the ‘ingstart' utility:
ingstart
17. Upgrade the databases in the installation to the new release level:
upgradedb -all
Linux:
1. Log on to the machine as ‘root'.
2. Copy the downloaded build update file and to a previously chosen directory and uncompress.
3. Read in the update file with the following command:
tar xf [update file]
This creates a directory containing rpm packages for all of the Ingres tools.
4. Shut down any non-Ingres application(s) that may be connected to or using any of the files in the specified Ingres instance.
5. Stop all Ingres processes with the ‘ingstop' utility:
ingstop
6. Important: Take an operating system backup of the $II_SYSTEM/ingres directory and other DATA locations that you may have elsewhere.
7. From the directory that was created in step 3, install the update rpms with the following command:
rpm –Uvh *.rpm
If the following error is seen for either the ‘ca-ingres-documentation-3.0.3-103', the ‘ca-ingres-CATOSL-3.0.3-103' or the ‘ca-cs-utils-11.0.04348-0000' (or all of them) packages,remove them from the directory containing the rpms and re-run the above command:
package <package-name> is already installed
8. If the installation finishes successfully, then log on as ‘ingres' to the machine and start Ingres using the ‘ingstart' utility:
ingstart
9. Upgrade ‘mdb' database with the following command:
upgradedb -all
For these products:
CA ARCserve Backup for Unix r11.1
CA ARCserve Backup for Unix r11.5 GA/SP1/SP2
CA ARCserve Backup for Unix r11.5 SP3
CA ARCserve Backup for Linux r11.1
EEM 8.1
eTrust Audit/SCC 8.0 sp2
NSM 3.0 0305
NSM 3.1 0403
NSM r3.1 SP1 0703
Unicenter Service Catalog r2.2
Unicenter ServicePlus Service Desk 6.0
Apply the update below that is listed for your platform (note that
URLs may wrap):
AIX 32bit [2.6/xxxx (rs4.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12718.tar.Z
AIX 64bit [2.6/xxxx (r64.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12798.tar.Z
HP-UX with ARCserve 11.1 or 11.5/GA/SP1/SP2/SP3
https://support.ca.com/irj/portal/anonymous/solndtls?aparNo=RO01277&os=HP&actionID=3
HP-UX Itanium [2.6/xxxx (i64.hpu/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12748.tar.Z
HP-UX RISC 32bit [2.6/xxxx (hpb.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12742.tar.Z
HP-UX RISC 32bit [2.6/xxxx (hpb.us5/00)DBL]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12888.tar.Z
HP-UX RISC 64bit [2.6/xxxx (hp2.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12749.tar.Z
HP Tru64 UNIX [2.6/xxxx (axp.osf/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12676.tar.Z
Linux AMD64 [2.6/xxxx (a64.lnx/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12809.tar.Z
Linux Intel 32bit [2.6/xxxx (int.lnx/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12645.tar.Z
Linux Intel 32bit [2.6/xxxx (int.lnx/00)DBL]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12647.tar.Z
Linux Intel 32bit [2.6/xxxx (int.lnx/00)LFS]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12646.tar.Z
Linux Itanium [2.6/xxxx (i64.lnx/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12648.tar.Z
Linux S/390 [2.6/xxxx (ibm.lnx/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12877.tar.Z
Solaris SPARC 32bit [2.6/xxxx (su4.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12713.tar.Z
Solaris SPARC 32bit double [2.6/xxxx (su4.us5/00)DBL]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12879.tar.Z
Solaris SPARC 64bit [2.6/xxxx (su9.us5/00)]
ftp://ftp.ca.com/CAproducts/ips/MDB/Generic_Ingres/Patches/2.6/p12751.tar.Z
Ingres 2.6 Vulnerability Updates Install Steps (August 1, 2008)
Unix/Linux:
1. Log on to your system using the installation owner account and make sure the environment is set up correctly:
1. II_SYSTEM must be set to the Ingres system files
2. PATH must include $II_SYSTEM/bin and $II_SYSTEM/utility directories.
2. Change directory to the root directory of the Ingres installation or use a previously created directory.
cd $II_SYSTEM/ingres
or
cd <patch_directory>
3. Copy the download maintenance update file in to the current directory and uncompress
4. Read in the update file with the following commands:
umask 022
tar xf [update_file]
This will create the directory:
$II_SYSTEM/ingres/patchXXXXX
or
<patch_directory>/patchXXXXX
Note: ‘XXXXX' in patchXXXXX refers to the update number
5. Stop all Ingres processes with the ‘ingstop' utility:
ingstop
6. Change directory to the patch directory:
cd patchXXXXX
7. Within the patch directory run the following command:
./utility/iiinstaller
Please check the $II_SYSTEM/ingres/files/patch.log file to make sure the patch was applied successfully. Also check the $II_SYSTEM/ingres/version.rel to make sure the patch is referenced.
Note: The patch can also be installed silently using the ‘-m' flag with iiinstaller:
./utility/iiinstaller -m
8. Once the patch install has been complete, re-link the iimerge binary with the following command:
iilink
9. Ingres can then be restarted with the ‘ingstart' utility:
ingstart
How to determine if you are affected:
For these products:
Admin r8.1 SP2
ARCserve for Linux r11.5 SP2/SP3
CA Directory r8.1
CA Job Management Option R11.0
CA Single Sign-On r8.1
EEM 8.2
EEM 8.2.1
Identity Manager r12
NSM r11
Unicenter Asset Management r11.1
Unicenter Asset Management r11.2
Unicenter Remote Control r11.2
Unicenter Service Catalog r11.1
Unicenter Service Metric Analysis r11.1
Unicenter ServicePlus Service Desk r11
Unicenter ServicePlus Service Desk r11.1
Unicenter ServicePlus Service Desk r11.2
Unicenter Software Delivery r11.1
Unicenter Software Delivery r11.2
Unicenter Workload Control Center r11
The Ingres release information is maintained in %II_SYSTEM%\ingres\version.rel:
UNIX or Linux: cat version.rel
The release identifier will be as follows:
| Operating System | Release identifier |
| HP Sparc 32/64bit | II 3.0.3 (hp2.us5/211) |
| HP Itanium | II 3.0.3 (i64.hpu/211) |
| Intel Solaris 32/64bit | II 3.0.3 (a64.sol/211) |
| AIX 32/64bit | II 3.0.3 (r64.us5/211) |
| Solaris 32/64bit | II 3.0.3 (su9.us5/211) |
| AMD Linux | II 3.0.3 (a64.lnx/211) |
| Intel Linux | II 3.0.3 (int.lnx/103) |
| Itanium Linux | II 3.0.3 (i64.lnx/211) |
Notes:
1. You would need to install the Ingres build instead of the patch if either of the following is true:
1. If the Ingres release for your platform is not 3.0.3 in the release identifier
or
2. The Ingres release is 3.0.3 but the build level is not 103 for Linux and 211 for all the Unix platforms.
If either of the above is true then download and apply the latest build for your operating system(s).
2. If the OS platform you are running Ingres on is not listed, please contact Technical Support.
For these products:
Advantage Data Transformer r2.2
Allfusion Harvest Change Manager r7.1
ARCserve for Linux r11.5 GA/SP1
CleverPath Aion BPM r10.1
CleverPath Aion BPM r10.2
The maintenance updates are provided for the latest r3 builds supported by CA which are 3.0.3/103 (Linux) and 3.03/211 (UNIX platforms). If the build embedded is earlier than 3.0.3, it has to be upgraded to 3.0.3 to fix the vulnerabilities.
The Ingres release information is maintained in %II_SYSTEM%\ingres\version.rel:
UNIX or Linux: cat version.rel
The release identifier will be as follows:| Operating System | Release identifier |
| HP Sparc 32/64bit | II 3.0.3 (hp2.us5/211) |
| HP Itanium | II 3.0.3 (i64.hpu/211) |
| Intel Solaris 32/64bit | II 3.0.3 (a64.sol/211) |
| AIX 32/64bit | II 3.0.3 (r64.us5/211) |
| Solaris 32/64bit | II 3.0.3 (su9.us5/211) |
| AMD Linux | II 3.0.3 (a64.lnx/211) |
| Intel Linux | II 3.0.3 (int.lnx/103) |
| Itanium Linux | II 3.0.3 (i64.lnx/211) |
Important:
For Linux (AMD, Intel and Itanium) platforms, after applying the build provided on this page, please download and apply the maintenance update. For the other platforms, the builds are patched to the latest maintenance update.
Note:
1. If the release you are using is already 3.0.3 build 103 on Linux and 3.0.3 build 211 on Unix, then download and install the maintenance update.
2. If the OS platform you are running Ingres on is not listed, please contact Technical Support.
For these products:
CA ARCserve Backup for Unix r11.1
CA ARCserve Backup for Unix r11.5 GA/SP1/SP2
CA ARCserve Backup for Unix r11.5 SP3
CA ARCserve Backup for Linux r11.1
EEM 8.1
eTrust Audit/SCC 8.0 sp2
NSM 3.0 0305
NSM 3.1 0403
NSM r3.1 SP1 0703
Unicenter Service Catalog r2.2
Unicenter ServicePlus Service Desk 6.0
The Ingres release information is maintained in %II_SYSTEM%\ingres\version.rel:
UNIX or Linux: cat version.rel
The release identifier will be as follows:
| Operating System | Release identifier |
| AIX 32bit | II 2.6/xxxx (rs4.us5/00) |
| AIX 64bit | II 2.6/xxxx (r64.us5/00) |
| HP-UX Itanium | II 2.6/xxxx (i64.hpu/00) |
| HP-UX RISC 32bit | II 2.6/xxxx (hpb.us5/00) |
| HP-UX RISC 32bit | II 2.6/xxxx (hpb.us5/00)DBL |
| HP-UX RISC 64bit | II 2.6/xxxx (hp2.us5/00) |
| HP Tru64 UNIX | II 2.6/xxxx (axp.osf/00) |
| Linux AMD64 | II 2.6/xxxx (a64.lnx/00) |
| Linux Intel 32bit | II 2.6/xxxx (int.lnx/00) |
| Linux Intel 32bit | II 2.6/xxxx (int.lnx/00)DBL |
| Linux Intel 32bit | II 2.6/xxxx (int.lnx/00)LFS |
| Linux Itanium | II 2.6/xxxx (i64.lnx/00) |
| Linux S/390 | II 2.6/xxxx (ibm.lnx/00) |
| Solaris SPARC 32bit | II 2.6/xxxx (su4.us5/00) |
| Solaris SPARC 32bit double | II 2.6/xxxx (su4.us5/00)DBL |
| Solaris SPARC 64bit | II 2.6/xxxx (su9.us5/00) |
Note:
1. If the Ingres release embedded in your product is not 2.6, please get the appropriate update here.
2. If the OS platform you are running Ingres on is not listed, please contact Technical Support.
3. For HP-UX platform with CA ARCserve Backup 11.1 or 11.5/GA/SP1/SP2/SP3, download the published ARCserve fix, RO01277:
https://support.ca.com/irj/portal/anonymous/solndtls?aparNo=RO01277&os=HP&actionID=3
and follow the enclosed instructions to install the security patch.
Workaround: None
References (URLs may wrap):
CA Support:
http://support.ca.com/
Security Notice for CA Products That Embed Ingres
https://support.ca.com/irj/portal/anonymous/phpsupcontent?contentID=181989
Solution Document Reference APARs:
RO01277 (ARCserve only)
CA Security Response Blog posting:
CA Products That Embed Ingres Multiple Vulnerabilities
community.ca.com/blogs/casecurityresponseblog/archive/2008/08/06.aspx
Reported By:
iDefense Labs
Ingres Database for Linux verifydb Insecure File Permissions Modification Vulnerability
http://labs.idefense.com/intelligence/vulnerabilities/display.php?id=731
Ingres Database for Linux libbecompat Stack Based Buffer Overflow Vulnerability
http://labs.idefense.com/intelligence/vulnerabilities/display.php?id=732
Ingres Database for Linux ingvalidpw Untrusted Library Path Vulnerability
http://labs.idefense.com/intelligence/vulnerabilities/display.php?id=733
Ingres
Security Vulnerability Announcement as of August 01, 2008
http://www.ingres.com/support/security-alert-080108.php
CVE References:
CVE-2008-3356 - Ingres verifydb file create permission override.
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-3356
CVE-2008-3357 - Ingres un-secure directory privileges with utility ingvalidpw.
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-3357
CVE-2008-3389 - Ingres verifydb, iimerge, csreport buffer overflow.
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-3389
OSVDB References: Pending
http://osvdb.org/
Changelog for this advisory:
v1.0 - Initial Release
Customers who require additional information should contact CA Technical Support at http://support.ca.com.
For technical questions or comments related to this advisory, please send email to vuln AT ca DOT com.
If you discover a vulnerability in CA products, please report your findings to our product security response team.
https://support.ca.com/irj/portal/anonymous/phpsupcontent?contentID=177782
By: Ken Williams
Ken Williams is a Director with the CA Vulnerability Research Team. As a veteran vulnerability researcher, Ken has worked as the Director of the CA Vulnerability Research Team and eVM Research Team, Director of Vulnerability Research at eSecurityOnline, Manager of the Vulnerability Research Team at Ernst...
Read More..